As one of the commonly used vibrating screening equipment, linear vibrating screen is highly favored by vibrating screen users due to its characteristics of large output, high screening efficiency, and easy maintenance.

Usually, the linear vibrating screen produced is shipped as a complete machine, so users do not need to consider the assembly of the linear screen equipment. However, there are also individual users who require the equipment to be disassembled and shipped for some special reasons, which requires users to assemble it themselves after receiving the equipment; Sometimes, when users of linear sieves encounter irreparable faults in the box, they need to replace the box, repair the equipment, or move the equipment over long distances, which also involves the issue of self-assembly. Relatively speaking, during the process of assembling the linear vibrating screen by the user, the installation of the equipment box is required For important reasons, if the box assembly is successful, the assembly work of the linear sieve is basically completed. If the user does not install the linear sieve box correctly, it will seriously affect the use of the equipment, resulting in the screening accuracy and screening effect not meeting the expected goals, and in severe cases, it may cause significant damage to the linear sieve equipment.

So, how to install the straight vibrating screen box correctly? Relatively speaking, the installation of the linear vibrating screen box is relatively simple, but for users, without guidance, they have no way to start. Therefore, Xingyue Machinery Technology Department has summarized five steps for installing the box, teaching you the correct installation method for the linear vibrating screen box.

Place the bracket

Place the screening machine bracket of the linear vibrating screen on a horizontal ground, making sure the bracket is facing upwards and not upside down. Use the spring base on the bracket as a reference, and the orientation of the spring base is upward.

Step 2: Anti slip bracket

The bracket should be equipped with anti slip measures to avoid movement during the installation of the linear screen box. Several rubber pads or conveyor belts can be placed under the bracket, or anchor bolts or other measures can be used to fix the bracket first and allow it to move during installation.

Step 3: Place the spring

Place the spring on the spring base of the bracket, and The height of all springs should be consistent, and there should be no obvious unevenness in the springs.

Step 4: Prepare the container

Usually, if the customer requests to dismantle the linear sieve for shipment, the vibration motor is already installed on the box when shipping, but there are also cases where the vibration motor is not installed on the box before shipment; When disassembling the linear screen for repair and maintenance, users may also remove the vibration motor. This step can be divided into the following two situations:

1. The vibration motor has been installed on the box

When the vibration motor is installed on the box for shipment, in order to transport, The linear sieve box will be inverted, with the vibration motor facing upwards. In this case, the user needs to flip the linear sieve box over so that the vibration motor faces downwards.

2. In the case where the vibration motor is not installed on the box, the user should first invert the linear screen box and install the vibration motor on the motor base located at the bottom of the box. Then, flip the linear screen box over so that the vibration motor faces downwards.

Step 5: Place the box

Lift the prepared linear vibrating screen box and place it stably on the spring. At this point, the installation of the linear vibrating screen box is complete.

The above five steps can complete the correct installation of the linear vibrating screen box. Users should strictly follow the step-by-step instructions to avoid unnecessary losses caused by problems during the installation of the box. Of course, except for equipment failures that require disassembly and repair, users should try to avoid disassembling the box as much as possible. If they need to move the linear screening equipment, they should also try to move the entire machine. If it is not necessary to ship, they should choose to ship the entire machine